The printed chassis

Actual CAD geometry · millimetres

Drag to orbit · scroll to zoom

Loading the rebuilt CAD package…

Inside tour

Loading the rev-P6 internals…

Explore the design

Inspect the design

Inspect a component

Shell, foundation and sled in their source-defined positions. Select a gland part or fit coupon for a separate inspection.

Inside

rev-P6 internals at real dimensions, read from the config output. Hover or tap a part for its name and size.

Tier

Drive 1

Drive 2

Converter side

Wi-Fi + antennas

Claim module

Cables

Show internals

Appearance

Colour preview only. Material specifications stay unchanged.

Reveal the interior

Separate components0%

Section through the centre (open cut)

Part specifications

220 × 220CHASSIS FOOTPRINT · MM

3 partsPRINTED CHASSIS

Rebuilt from the revP5 source. No magnets. No obsolete metal enclosure.

Physical fit checks pending

The design package is verified against its source. It is not yet a manufacturing sign-off.

What still needs checking

Print fit coupons and choose the slide clearance.
Measure the actual board and cooler height.
Reconcile the internal HDPLEX converter and Dell brick with the CAD power model before ordering.
Check rear I/O, the exact power jack, cable bend and strain relief.
Test insert retention, assembly access and printed identity.
Measure airflow, noise and temperatures with the real electronics.

Electronics, cables and fasteners are not included in these CAD meshes. Gland components are shown individually; their assembled fit needs the coupler.

Package provenance

RevP5 · 13 printed parts and coupons
Source 3816150 · rebuilt 23 September 2026
Original triangle positions preserved in GLB. Each loaded asset is checked against its SHA-256.